` China GHD-V-NC Glass Drilling Machine Manufacture and Factory | CBS
Welcome to our websites!

GHD-V-NC Glass Drilling Machine

Short Description:

GHD-V series are vertical glass holes drilling machines. The machines drill holes with glass vertically placed by means of core drilling bits. It is easier for drilling spindles to locate from one hole to the next hole when glass is placed vertically rather than horizontally. This design helps to drill multiple holes on a single piece of glass in a faster way at lesser workload. Xinology provides two types of vertical glass drilling machine.


Product Detail

Product Tags

glass-hole-drilling-machine

GHD-V series are vertical glass holes drilling machines. The machines drill holes with glass vertically placed by means of core drilling bits. It is easier for drilling spindles to locate from one hole to the next hole when glass is placed vertically rather than horizontally. This design helps to drill multiple holes on a single piece of glass in a faster way at lesser workload. Xinology provides two types of vertical glass drilling machine.

- Budget vertical drilling machine

- Front & rear double drilling spindles

- Drilling spindles move up & down along vertical bridge simply by pressing button

- Glass horizontal movement by manual

- Spindles rotational speed regulated by frequency converter

- Center core drill water cooling

- Easy operation

- Simple but reliable design

Operation

- Load glass & move glass manually along support rail until horizontal hole position is registered

- Push button to move spindles up or down until vertical hole position is registered

- Turn hand wheel to feed spindles & core drill as well manually approaching glass surface to check hole position

- If core drillers do not align & match hole position, adjust glass horizontal position & spindles vertical position until core drillers align with hole position

- Push button to activate glass pressing support to hold glass in position

- Rear spindles & front spindles are to be worked in sequence automatically

Specifications

Nr. Of Drilling Spindles

One pair (front & rear)

NC Numerical Control

Yes

PLC

Yes

HMI Touch Panel Operator Interface

Yes

Rear Drill Spindle Feeding

Automatic

Front Drill Spindle Feeding

Automatic

Drill Holes Registration

Automatic

Max. Glass Size

5000 x 2500 mm

Min. Glass Size

500 x 500 mm

Vertical Distance From Glass Bottom Edge to Hole Edge

80 ~ 2450 mm

Glass Thickness

5 ~ 25 mm

Glass Drill Hole Diameter

Φ4 ~ Φ100 mm

Drill Holes Positioning Accuracy

± 0.50 mm

Concentricity Precision of Front & Rear Drills

± 0.10 mm

Glass Horizontal Travel Speed

0 ~ 5 m/min. (by servo motor)

Drill Spindles Up / Down Travel Speed

0 ~ 4.2 m/min. (by servo motor)

Spindles Rotational Speed

Regulated by frequency converter

Drill Spindles Forward / Backward Feeding

Pneumatic

Water Cooling

Water running inside core dill bit

Compress Air Consumption

1 Lt/min.

Compress Air Pressure

0.6 ~ 0.8 MPa

Power

7.2 kW

Voltage

380 V / 3 Phase / 50 Hz (others on request)

Weight

2000 kg

Outer Dimension

8000(L) x 1200(W) x 3700(H) mm


  • Previous:
  • Next:

  • Write your message here and send it to us